Can-Am Outlander 500
Can-Am –
Outlander 500 (2007-2013)
Black Round Pre Filter with Top
by Outerwears
- Outerwear will ONLY fit K&N: BD-6506
- Improve efficiency of any high performance or exposed filter.
- Filters down to .005”
- Extends service intervals reducing cost and increasing convenience.
- Water, snow and ice repellant. UV resistant.
$19.95 $22.95
Can-Am –
Outlander 500 (2007-2012)
Black Round Taper Pre Filter with Top
by Outerwears
- Outerwear will ONLY fit: 707800174
- Improve efficiency of any high performance or exposed filter.
- Filters down to .005”
- Extends service intervals reducing cost and increasing convenience.
- Water, snow and ice repellant. UV resistant.
$18.45 $18.95
Can-Am –
Outlander 500 (2007-2012)
Foam High Air Flow Filter
by UNI
- Will NOT Void Vehicle Warranty.
- Uni Foam Air Filters use polyurethane foam as the filtration media because of it's superior dirt capturing abilities.
- "Open Cell" Polyurethane Foam is wetted with specially developed filter oil - (NOT INCLUDED).
$43.75
let's deal!
Can-Am –
Outlander 500 (2008-2012)
EFI Controller
by HMF Engineering
- Pre-loaded map developed by HMF specifically for quads that run a HMF exhaust.
- No laptop necessary/push button tuning on the fly.
- Uses load based technology which allows for tuning in every gear.
$287.96 $319.95
let's deal!
Can-Am –
Outlander 500 (2013-2015)
EFI Controller
by HMF Engineering
- Pre-loaded map developed by HMF specifically for quads that run a HMF exhaust.
- No laptop necessary/push button tuning on the fly.
- Uses load based technology which allows for tuning in every gear.
$287.96 $319.95
let's deal!
Can-Am –
Outlander 500 (2006-2007)
EFI Optimizer Controller
by HMF Engineering
- Pre-loaded map developed by HMF specifically for quads that run a HMF exhaust.
- No laptop necessary/push button tuning on the fly.
- Uses load based technology which allows for tuning in every gear.
$287.96 $319.95
let's deal!
Can-Am –
Outlander 500 (2007-2015)
EFI Optimizer Controller
by HMF Engineering
- Pre-loaded map developed by HMF specifically for quads that run a HMF exhaust.
- No laptop necessary/push button tuning on the fly.
- Uses load based technology which allows for tuning in every gear.
$287.96 $319.95
let's deal!
Can-Am –
Outlander 500 (2007-2008)
Performance Full Black Exhaust & Brushed End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$630.86 $700.95
let's deal!
Can-Am –
Outlander 500 (2008-2012)
Performance Full Black Exhaust & Brushed End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$630.86 $700.95
let's deal!
Can-Am –
Outlander 500 (2007-2008)
Performance Full Blackout Exhaust & Blackout End Cap
by HMF Engineering
- Capable of withstanding up to 1200°F, this ceramic based finish is formulated to withstand the extreme temperatures from an exhaust system. As a result, your exhaust should have less intense exposure to the elements, protecting you for any application or use.
- The HMF Performance Series has a specially designed, unrestricted core that allows the exhaust to increase power evenly throughout the entire power curve which features the signature HMF sound.
- The slip on systems will feature a ceramic coated inlet and end cap while the full and 3/4 systems will also have a ceramic coated head pipe.
$702.86 $780.95
let's deal!
Can-Am –
Outlander 500 (2008)
Performance Full Blackout Exhaust & Blackout End Cap
by HMF Engineering
- Capable of withstanding up to 1200°F, this ceramic based finish is formulated to withstand the extreme temperatures from an exhaust system. As a result, your exhaust should have less intense exposure to the elements, protecting you for any application or use.
- The HMF Performance Series has a specially designed, unrestricted core that allows the exhaust to increase power evenly throughout the entire power curve which features the signature HMF sound.
- The slip on systems will feature a ceramic coated inlet and end cap while the full and 3/4 systems will also have a ceramic coated head pipe.
$702.86 $780.95
let's deal!
Can-Am –
Outlander 500 (2008-2012)
Performance Full Blackout Exhaust & Blackout End Cap
by HMF Engineering
- Capable of withstanding up to 1200°F, this ceramic based finish is formulated to withstand the extreme temperatures from an exhaust system. As a result, your exhaust should have less intense exposure to the elements, protecting you for any application or use.
- The HMF Performance Series has a specially designed, unrestricted core that allows the exhaust to increase power evenly throughout the entire power curve which features the signature HMF sound.
- The slip on systems will feature a ceramic coated inlet and end cap while the full and 3/4 systems will also have a ceramic coated head pipe.
$702.86 $780.95
let's deal!
Can-Am –
Outlander 500 (2013-2016)
Performance Full Blackout Exhaust & Blackout End Cap
by HMF Engineering
- Capable of withstanding up to 1200°F, this ceramic based finish is formulated to withstand the extreme temperatures from an exhaust system. As a result, your exhaust should have less intense exposure to the elements, protecting you for any application or use.
- The HMF Performance Series has a specially designed, unrestricted core that allows the exhaust to increase power evenly throughout the entire power curve which features the signature HMF sound.
- The slip on systems will feature a ceramic coated inlet and end cap while the full and 3/4 systems will also have a ceramic coated head pipe.
$683.96 $759.95
let's deal!
Can-Am –
Outlander 500 (2008-2012)
Performance Full Brushed Aluminum Exhaust & Brushed End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$612.86 $680.95
let's deal!
Can-Am –
Outlander 500 (2013-2016)
Performance Full Brushed Aluminum Exhaust & Brushed End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$593.96 $659.95
let's deal!
Can-Am –
Outlander 500 (2007-2008)
Performance Full Brushed Aluminum Exhaust & Brushed End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$612.86 $680.95
let's deal!
Can-Am –
Outlander 500 (2013-2016)
Performance Full Yellow Exhaust & Black End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$620.96 $689.95
let's deal!
Can-Am –
Outlander 500 (2008-2012)
Performance Slip On Black Exhaust & Black End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$377.96 $419.95
let's deal!
Can-Am –
Outlander 500 (2013-2016)
Performance Slip On Black Exhaust & Black End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$377.96 $419.95
let's deal!
Can-Am –
Outlander 500 (2013-2016)
Performance Slip On Black Exhaust & Black End Cap
by HMF Engineering
- The Performance Series uses a 2 1/8" non-restrictive core for maximum flow.
- Depending on the model, you can expect a 4-6 dB increase over stock.
- The exhaust shell is made of T6061 Aluminum that weighs substantially less than stock.
$377.96 $419.95
let's deal!Shipping out of 40+ warehouses across the United States
When you shop with RPO Powersports, you'll be connected to one of the largest networks of parts warehouses across the nation. What does that mean for you? Lower shipping costs and faster delivery times. Whether you're waiting for Beard Seats on your Polaris RZR XP 1000, or grabbing a Pelican Backpack to carry while riding your Can-Am Maverick X3, RPO Powersports can deliver the parts you need quickly, guaranteed.
Categories
Makes/Models
Support